Thursday, August 9, 2012

Brushing Putty

As I mentioned in my last post, Brushing Putty is my secret weapon for putting a final finish on a painted surface. You may recall that I mentioned my using it on the aprons I rehabilitated for the left window casing on the south side of the house.


Brushing Putty, now marketed in this country under the Fine Paints of Europe brand, is an oil-base paint with a huge amount of fine-grained solids mixed into it. It needs a primer coat of oil-base paint. You apply a thick coat of it with a paintbrush; the paint levels nicely, and in the process fills in every tiny irregularity. After it dries completely (from 12 to 16 hours), you sand it flat with 180- to 220-grit sandpaper, and if any surface irregularities remain, you repeat the process if desired. Then, you cover it with a coat of oil-base paint.

As you can see, I've had my can of it so long that the bottom has rusted. Brushing Putty can be difficult to use on figured surfaces, which is why I seldom use it. On a simple board, on the other hand, it's quite easy—especially when the board can be laid flat. The present situation is thus ideal for it. Well, it's actually not quite ideal, because the boards are not flat; the cupping and warping complicate matters significantly. So it's not quite easy. It requires some fancy sanding. Nothing regarding the Farm House is easy except for falling off the roof.

Still, when it's all done and the top coat of primer is on, the improvement is well worth the work:



Now this is more like it! Allow me to indulge in some Before and After action:


As you can clearly see, the garage is much neater now. Thank you.

Ironically, there still are areas of differing sheen on the boards, which you can see in the After photo above. This is visual evidence that very hot weather is not good for painting, even when inside. Without boring you with the technical details, when paint dries too fast (and is not in direct sunlight), the areas drying last are shinier than the other areas. Happily, this difference in sheen will disappear with a light sanding.

And so, none too soon, I am done with painting for a little while. While this extremely hot (over 100 degrees) weather is bad for painting, it is excellent for puttying, and falling off roofs. I'll be doing some of those things when next we meet.

* * *


14 comments:

  1. Looking at the new boards, I wouldn't be surprised if there were complaints that you were using new would. What a contrast!

    ReplyDelete
    Replies
    1. Aww, thanks. They came out better than I had expected.

      Delete
  2. OR WOOD!!! Caption: "So what do you have to say?"

    ReplyDelete
    Replies
    1. Spell-check is a fickle friend.

      Do you mean a caption for the picture of Wolfette?

      Delete
  3. Ah, what a sweetheart. Clearly happy to be of service.

    ReplyDelete
    Replies
    1. Little Wolfette is just as sweet and loving as she appears, and then some.

      Delete
  4. Forgot to mention what a stunning transformation! The before and after really demonstrate what a remarkable restoration you have performed.

    ReplyDelete
    Replies
    1. Well, thanks! I'll wait to see them back in place before I give myself a pat on the back, but I sure welcome yours anytime!

      Delete
  5. With all this heat, surprising that the paint isn't just peeling off!

    ReplyDelete
    Replies
    1. Yeah, actually I am a little worried that the Brushing Putty may do something like that when I re-attach the boards. See, they're somewhat warped, and will thus be flexed when they are flattened back out as a result of being put back on the house; I hope the Brushing Putty flexes with the wood, and does not have other plans.

      That's why I'm waiting to pat myself in the back until the boards are back in place!

      Delete
  6. It's really a nice and helpful piece of information. I'm satisfied that you simply shared this
    useful

    info with us.
    Please stay us up to date like this. Thank you for sharing.

    ReplyDelete
    Replies
    1. Thanks! Your kind words are greatly appreciated. I'm gratified you found this post helpful; Brushing Putty really is a great help in restoring worn wood surfaces.

      Delete
  7. Good post however I was wondering if you could write a litte more on this
    subject? I'd be very thankful if you could elaborate a little bit
    further. Many thanks!

    ReplyDelete
    Replies
    1. I will be using Brushing Putty a great deal more as I move to the veranda restoration, so I will have the opportunity to write more about its use then. Thanks for your interest!

      Delete

Please don't let the "Comment as" dropbox annoy you:
Simply choose "Anonymous," and no one will check your papers.
Feel free to leave your name in the comment if you'd like.
I will be moderating the comments to keep out the spam.